Teensy40_ESP8266Shield.ino

/****************************************************************************************************************************
  Teensy40_ESP8266Shield.ino
  For Teensy using ESP8266 WiFi Shield
  
  Blynk_Esp8266AT_WM is a library for the Mega, Teensy, SAM DUE and SAMD boards (https://github.com/khoih-prog/Blynk_Esp8266AT_WM)
  to enable easy configuration/reconfiguration and autoconnect/autoreconnect of WiFi/Blynk
  
  Based on and Modified from Blynk library v0.6.1 https://github.com/blynkkk/blynk-library/releases
  Built by Khoi Hoang https://github.com/khoih-prog/Blynk_Esp8266AT_WM
  Licensed under MIT license
 *****************************************************************************************************************************/

#include "defines.h"

#if USE_BLYNK_WM
  #include "Credentials.h"
  #include "dynamicParams.h"
  
  #define BLYNK_PIN_FORCED_CONFIG           V10
  #define BLYNK_PIN_FORCED_PERS_CONFIG      V20

// Use button V10 (BLYNK_PIN_FORCED_CONFIG) to forced Config Portal
BLYNK_WRITE(BLYNK_PIN_FORCED_CONFIG)
{
  if (param.asInt())
  {
    Serial.println( F("\nCP Button Hit. Rebooting") );

    // This will keep CP once, clear after reset, even you didn't enter CP at all.
    Blynk.resetAndEnterConfigPortal();
  }
}

// Use button V20 (BLYNK_PIN_FORCED_PERS_CONFIG) to forced Persistent Config Portal
BLYNK_WRITE(BLYNK_PIN_FORCED_PERS_CONFIG)
{
  if (param.asInt())
  {
    Serial.println( F("\nPersistent CP Button Hit. Rebooting") );

    // This will keep CP forever, until you successfully enter CP, and Save data to clear the flag.
    Blynk.resetAndEnterConfigPortalPersistent();
  }
}

#endif

ESP8266 wifi(&EspSerial);

void heartBeatPrint()
{
  static int num = 1;

  if (Blynk.connected())
  {
    Serial.print("B");
  }
  else
  {
    Serial.print("F");
  }

  if (num == 80)
  {
    Serial.println();
    num = 1;
  }
  else if (num++ % 10 == 0)
  {
    Serial.print(" ");
  }
}

void check_status()
{
  #define STATUS_CHECK_INTERVAL     20000L
  
  static unsigned long checkstatus_timeout = STATUS_CHECK_INTERVAL;

  // Send status report every STATUS_REPORT_INTERVAL (20) seconds: we don't need to send updates frequently if there is no status change.
  if ((millis() > checkstatus_timeout) /*|| (checkstatus_timeout == 0)*/)
  {
    // report status to Blynk
    heartBeatPrint();

    checkstatus_timeout = millis() + STATUS_CHECK_INTERVAL;
  }
}

void setup()
{
  // Debug console
  Serial.begin(115200);
  while (!Serial);
  
  delay(200);

  Serial.print(F("\nStart Teensy_ESP8266Shield on ")); Serial.println(BOARD_NAME);
  Serial.println(BLYNK_ESP8266AT_WM_VERSION);
  Serial.println(ESP_AT_LIB_VERSION);

  // initialize serial for ESP module
  EspSerial.begin(ESP8266_BAUD);

#if USE_BLYNK_WM
  Serial.println(DOUBLERESETDETECTOR_GENERIC_VERSION);
  Serial.println(F("Start Blynk_ESP8266AT_WM"));

  // Optional to change default AP IP(192.168.4.1) and channel(10)
  //Blynk.setConfigPortalIP(IPAddress(192, 168, 200, 1));
  // Personalized portal_ssid and password
  Blynk.setConfigPortal(portal_ssid, portal_password);
  //Blynk.setConfigPortal("Teensy_WM", "MyTeensy_PW");
  Blynk.setConfigPortalChannel(0);
  
  Blynk.begin(wifi);
#else
  Serial.print(F("Start Blynk no WM with BlynkServer = "));
  Serial.print(BlynkServer);
  Serial.print(F(" and Token = "));
  Serial.println(auth);

  Blynk.begin(auth, wifi, ssid, pass, BlynkServer.c_str(), BLYNK_SERVER_HARDWARE_PORT);
#endif
}

#if (USE_BLYNK_WM && USE_DYNAMIC_PARAMETERS)
void displayCredentials()
{
  Serial.println("\nYour stored Credentials :");

  for (uint8_t i = 0; i < NUM_MENU_ITEMS; i++)
  {
    Serial.println(String(myMenuItems[i].displayName) + " = " + myMenuItems[i].pdata);
  }
}

void displayCredentialsInLoop()
{
  static bool displayedCredentials = false;

  if (!displayedCredentials)
  {
    for (uint8_t i = 0; i < NUM_MENU_ITEMS; i++)
    {
      if (!strlen(myMenuItems[i].pdata))
      {
        break;
      }

      if ( i == (NUM_MENU_ITEMS - 1) )
      {
        displayedCredentials = true;
        displayCredentials();
      }
    }
  }
}
#endif

void loop()
{
  Blynk.run();
  check_status();

#if (USE_BLYNK_WM && USE_DYNAMIC_PARAMETERS)
  displayCredentialsInLoop();
#endif 
}